SnowWolf AlphaBlower 33-100-H, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 98

19 AlphaBlower Operation and Maintenance Manual
Operation
General Information
Pre-Operation Inspection
Before operating the snow blower for the first time
and each time thereafter, use the following list as
a guideline during equipment inspection.
1. Use only a machine of adequate power to
operate the snow blower. (See Tractor or
Loader Requirements on page 24).
2. Check the snow blower and tractor’s three-
point mounts and loader fusion IT mounts for
damage, loose or missing parts. Repair as
needed before operation.
3. Lubricate the snow blower, see Lubrication on
page 43.
4. Check that the PTO shaft telescopes easily
and turns freely.
5. Check that the snow blower is properly
attached to the machine. Be sure retainers are
used on the mounting pins.
6. Check that wear shoes / gauge wheels (if
equipped) are set at the same working depth.
7. Make sure that all guards and shields are in
place, secured and functioning as designed.
8. Check oil level in machine hydraulic reservoir.
9. Check that the hydraulic hoses and couplers
are securely attached to the machine. Make
sure hoses are routed and secured to avoid
pinch points or strain during movement of the
machine / snow blower.
10. Check cutting blade for wear or damage.
11. Check hydraulic lines, connections and fittings
for hydraulic oil leaks.
12. Check all electrical connections.
Snow Blower Operating Tips
• Make sure the snow blower is adjusted
properly. (See “AlphaBlower Adjustment” on
page 29.)
NOTE: Improper snow blower adjustment will
cause increased wear to the cutting
edge or wear shoes.
• Driving speed and gear selection are
dependent on the snow conditions and the
machine type. Do not choose too high a gear
but make a selection so speed can be kept
steady.
• Before disengaging the PTO it is important to
wait until the blower has emptied out the snow.
If the PTO is disengaged while the blower is full
of snow, the chute will likely clog up when the
PTO is re-engaged.
• If the blower is frequently used on gravel roads
or asphalt, in conditions with little snow, it is
recommended to use gauge wheels instead of
wear shoes.
• Adjust throwing distance and the direction of
the snow being removed, away from buildings,
cars, or other objects to avoid causing
damage.
• Always stop the snow blower before exiting the
machine.