background image

9

2.  Connect the silver end of the high-pressure hose to the 

trigger gun and twist the nut clockwise to secure the 

connection (Fig. 3).

3.  Connect the other end of the high-pressure hose to the 

water outlet on the washer and twist the black rotatable 

end-piece to secure the connection (Fig. 4).

m

WARNING! 

Keep hose away from sharp objects. 

Bursting hoses may cause injury. Examine hoses regularly and 

replace if damaged. Do not attempt to mend a damaged hose.

4.  Connect the garden hose adapter (female coupler) to 

the water inlet of the pressure washer, then thread your 

garden hose (male end) into the garden hose adapter 

 

(Fig. 5). The garden hose must have an internal diameter 

of at least 13 mm (1/2 in.) and must be reinforced. The 

water supply must be at least equal to the washer delivery 

capacity.

 

NOTE: The machine is not suitable for connection to the 

potable water main.

5.  Attach garden hose to water supply (Fig. 6).

Connect as Vacuum/Blower

m

WARNING! 

Make sure the unit is not connected to 

power and is switched off before assembly. 

1.  To use the tool as a vacuum, insert the vacuum tube into 

the air inlet, and twist clockwise to secure (Fig. 7).

Fig. 2

Trigger gun

Spray wand

Fig. 3

Trigger gun

High-pressure 

hose

Fig. 4

Water outlet

High-pressure hose

Fig. 5

Garden hose adapter 

(female coupler)

Garden hose

This end to 

water inlet

Garden hose  

(male end)

Water inlet

Fig. 6

Connect to water supply

Garden hose

Содержание Sunjoe SPX7001E





















Отзывы: