background image

3

•  Do not use to pick up flammable or combustible liquids, 

such as gasoline, or use in areas where they may be 

present.

• 

Maintain the wet/dry vacuum with care – Keep the 

air inlet/outlet clear and clean for optimal performance 

and to reduce the risk of injury. Keep the housing dry, 

clean and free from oil and grease. Follow the additional 

recommendations described in the maintenance section of 

this manual.

  Avoid dangerous environments – Do not use the wet/

dry vacuum in rain, damp or wet locations. Do not operate 

the wet/dry vacuum in gaseous or explosive atmospheres 

or use the wet/dry vacuum to pick up flammable or 

combustible liquids. Motors in these tools normally spark, 

and the sparks might ignite fumes.

•  Keep firm footing and maintain good balance at all times. 

Do not overreach. Overreaching can result in loss of 

balance.

•  Do not pick up anything that is burning or smoking, such as 

cigarettes, matches or hot ashes. 

•  Do not use without the dust compartment or filters in place. 
•  Do not put any object into the tool's openings. Do not use 

the tool with any opening blocked; keep openings free of 

dust, lint, hair or any other object that may reduce air flow.

•  Check the work area before each use. Remove all objects 

such as rocks, broken glass, nails, wire or string which can 

be thrown or become entangled in the machine.

•  Prevent cords, plastic bags, or similar items from getting 

sucked in. This may cause an overload or blocking of the 

motor. 

Electrical Safety

ATTENTION: 

If there are problems with the electrical 

MAINS, short voltage drops may appear when starting the 

equipment. This can, in turn, influence other equipment 

 

(e.g. cause a lamp to blink). If the MAINS-IMPEDANCE Zmax 

< 0.335 OHM, such disturbances are not expected. (If you 

require assistance, contact your local supply authority for 

further information). 

m

WARNING!

 

Electrical Shock Hazard – Before starting 

up your machine, please check it carefully for any defects. 

If you find any, do not start up your machine. Contact your 

authorized Snow Joe

®

 + Sun Joe

®

 dealer or call the Snow Joe

®

 

+ Sun Joe

®

 customer service center at 1-866-SNOWJOE  

(1-866-766-9563).
The following should be observed when connecting the  

unit to the electric supply:

•  The electric supply connection should be performed by a 

qualified person.

IMPORTANT: 

Only use water without any impurities for the 

pressure washer. If there is a risk of running sand into the inlet 

water (i.e. from your own well), an additional filter should be 

installed.

Safety devices

The unloader valve can reduce pressure if it exceeds preset 

values. The spray gun features a locking device. When the lock 

is activated, the spray gun cannot be operated.

1.  Thermal sensor – A thermal sensor protects the motor 

against overloading. The machine will restart after a few 

minutes when the thermal sensor has cooled.

2.  Double insulation – In a double-insulated appliance, two 

systems of insulation are provided instead of grounding. 

No grounding means is provided on a double-insulated 

appliance, nor should a means for grounding be added 

to the appliance. Servicing a double-insulated appliance 

requires extreme care and knowledge of the system, and 

should be performed only by qualified service personnel at 

an authorized Snow Joe

®

 + Sun Joe

®

 dealer. Replacement 

parts for a double-insulated appliance must be identical 

to the parts they replace. A double-insulated appliance 

is marked with the words “Double Insulation” or “Double 

Insulated.” The symbol     (square within a square) may 

also be marked on the appliance.

  This appliance is provided with double insulation. Use only 

identical replacement parts. See instructions for servicing 

of Double-Insulated Appliances.

3.  Ground fault circuit interrupter (GFCI) protection – this 

product is provided with a Ground Fault Circuit Interrupter 

built into the power cord plug. If replacement of the plug 

or cord is needed, use only identical replacement parts.

4.  It is not recommended to use an extension cord with 

this pressure wet/dry vacuum. The unit comes 

standard with a 35 ft GFCI power cable. Using an 

extension cord may cause a drop in line voltage resulting 

in loss of power and overheating.

  Use only extension cords that are intended for outdoor 

use. These extension cords are identified by marking 

"Acceptable for use with outdoor appliance; store indoors 

while not in use". Use only extension cord having an 

electrical rating not less than the rating of the product. Do 

not use damaged extension cords. Examine extension 

cord before using and replace if damaged. Do not 

abuse extension cord and do not yank on any cord to 

disconnect. Keep cord away from heat and sharp edges. 

Always disconnect extension cord from the receptacle 

before disconnecting the product from the extension cord.

5.  To reduce the risk of electric shock, this appliance has  

a polarized plug (i.e. one blade is wider than the other).  

The appliance plug will fit into a polarized outlet only 

 

one way.

  If the appliance plug does not fit fully into the outlet, 

reverse the plug. If the plug still does not fit, make sure 

that you are using the correct polarized wall outlet. If the  

plug still does not fit, contact a qualified electrician to 

install the proper wall outlet. Do not modify the appliance 

plug, power cord receptacle, or power cord plug in  

any way.

Содержание Sunjoe SPX7001E





















Отзывы: