SNOWJOE Sunjoe GTS4002C-RM, Руководство оператора

Страница: 21 / 36

Assembly
m
WARNING!
Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Fitting the Safety Guard
m
WARNING!
The guard must be properly installed.
The guard provides the operator and other bystanders with
some protection from thrown objects.
1. Align the safety guard with the grass t edger
head as shown (Fig. 31).
2. Firmly press the safety guard into place until it clicks into
the position (Fig. 32).
Connecting to the Telescoping Pole
1. Open the assembly lock on the telescoping pole, and
push the grass t edger head into the opening on
the end of the pole (Fig. 33).
2. When the lock tabs snap in, lock back the assembly lock,
and the grass t edger will be ready to use
(Fig. 34).
3. To remove the grass t edger head, release
the On/Off switch and remove the battery. Unlock the
assembly lock, push the lock tabs on both sides, and pull
the grass t edger head out (Fig. 34).
Grass T Edger
Fig. 31
Safety Guard
Grass trimmer
+ edger head
Fig. 32
Safety Guard
Grass trimmer
+ edger head
Telescoping pole
Fig. 33
Grass trimmer
+ edger head
Assembly lock
Fig. 34
Lock tab
Assembly lock
20