SNOWJOE iON24SB-CT-RM, Руководство оператора

Страница: 6 / 28

5
before use. Use only those replacement parts made for your
model. When replacing any parts, you must strictly observe
the instructions and procedures described in this manual.
Special care should be paid to any rubber parts, since
these parts may increase the engine load and decrease its
mechanical power if damaged.
• Tip over hazard – DO NOT operate near drop-offs, ditches,
or embankments. Unit can suddendly turn over if a wheel is
over the edge of a cliff or ditch, or if an edge caves in.
• Always back up slowly – Do not operate in reverse unless
absolutely necessary. Always look down and behind before
and while backing.
• Travelling – Disengage auger drive when travelling from one
work area to another.
• Skid shoes – Adjust skid shoes to clear gravel or crushed
rock surfaces safely.
• Prevent unauthorized use – Never leave snow blower
unattended with key in. Always stop the motor, remove the
key and battery packs to prevent unauthorized use.
• Check all controls frequently – Check both triggers and
safety switch frequently. Adjust and service as required.
All motion of drive wheels and auger/impeller must stop
quickly when triggers are released.
• Avoid steep slopes – DO NOT operate on steep slopes.
DO NOT clear snow across the face of slopes. Keep all
movement on slopes slow and gradual. DO NOT make
sudden changes in speed or direction. Use a slow speed to
avoid stops or shifts on slopes. Avoid starting or stopping
on a slope.
• Keep all hardware properly tightened – Check shear bolts
frequently.
Electrical Safety
• Electrical plugs must match the outlet – Never modify
the plug in any way. Do not use any adapter plugs with
grounded appliances. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
• Avoid accidental starting – Make sure the safety switch
is off and the triggers are disengaged before inserting the
battery packs into the unit. Do not transport the snow
blower with the safety switch and the triggers engaged.