SNOW WOLF UltraPlow, Руководство по эксплуатации и техническому обслуживанию

Страница: 25 / 76

23 UltraPlow Operation and Maintenance Manual
Operation
Attachment Removal
NOTE: Put the UltraPlow on planks or blocks
before removing it from the machine to
prevent it from settling or sinking in
soft / wet ground.
Park the machine and attachment on a flat level
surface.
Lower the lift arms and put the UltraPlow flat on
the ground.
Stop the engine and engage the parking brake.
Relieve auxiliary hydraulic pressure. (See the
machine’s Operator’s Manual for correct
procedure.)
Leave the operator’s position. (See “Leaving The
Operator’s Position” on page 19.)
Disconnect the auxiliary hydraulic hoses. (See
“Hydraulic Couplers” on page 20.)
Disengage the attachment locking levers /
wedges. (See the machine’s Operator’s Manual
for correct procedure.)
AVOID BURNS
Hydraulic fluid, tubes, fittings and quick
couplers can get hot during operation. Be
careful when connecting and disconnecting
hydraulic hoses.
Enter the machine. (See “Entering The Operator’s
Position” on page 19.)
Start the engine and release the parking brake.
Engage the machine’s auxiliary hydraulics. (See
the machine’s Operation Manual for correct
procedure.)
Slowly tilt the machine’s mounting plate forward
until the attachment mounting frame is free from
the machine’s mounting plate.
Drive the machine slowly backward, away from
the attachment.