SNOW WOLF UltraPlow, Руководство по эксплуатации и техническому обслуживанию

Страница: 24 / 76

22
UltraPlow Operation and Maintenance Manual
Operation
Operating The
Attachment
Operation
AVOID INJURY OR DEATH
While operating the machine:
•
Always keep seat belt fastened
.
•
Safety seat bar lowered (if equipped)
Always keep your feet on the pedals or
footrests and hands on the controls
Adjust wear shoes (if equipped) to desired height.
(See “Wear Shoe Adjustment / Replacement (if
equipped)” on page 30.)
Enter the machine. (See “Entering The Operator’s
Position” on page 19.)
Start the engine and release the parking brake.
Engage the machine’s auxiliary hydraulics. (See
the machine’s Operation Manual for correct
procedure.)
Raise the UltraPlow slightly off the ground.
Set the desired left/right blade angle and up/down
tilt.
Regulate the scraping ability of the UltraPlow by
increasing or decreasing the down pressure
applied via the tilt cylinders. The angle of the
UltraPlow can be changed at any time by using
the auxiliary circuit.
NOTE: Always be sure the A-frame of the
UltraPlow is level (parallel) with the
ground when plowing, to insure proper
cutting edge wear.
NOTE: The machine speed is determined by
the depth and density of the material
being moved.
NOTE: On extremely uneven ground, raise the
boom arms slightly, lower the
UltraPlow to the ground using the tilt
cylinders, then put the boom arms in
the float position (if machine is
equipped) to follow the contours of the
ground.
Stacking Snow
Figure 2
The UltraPlow has been designed to stack snow if
desired
[Figure 2] .
AVOID SERIOUS INJURY OR DEATH
Always be aware of overhead obstacles or
power lines when stacking snow.
NOTE: Watch the hose routing carefully so as
not to stretch or damage hydraulic
hoses.