SNIJDERS SCIENTIFIC
B.V.
ISO9001 certified by Lloyd’s
Economic Premium ECP01E, March ‘06
Page 18 of 22
Subject to change
7.
MAINTENANCE
-
Clean the condenser on the frontside of the cabinet regularly. This can be done with a soft brush
or carefully with a vacuumcleaner. It is preferable to use compressed air when this is available.
-
Check the intensity of the fluorescent tubes regularly. This intensity will decrease, as the tubes
will age. If the intensity is not sufficient anymore, the tubes need to be changed.
-
Cleaning of the isolated glass results in an optimal transmittance of the light of the fluorescent
tubes.
-
The shelves inside the cabinet are made of a stainless steel frame with a polystyrene inlay. These
shelves may not be sterilized and must be cleaned with a cleaning-solution or with a
desinfection solution.
-
The cabinet can be cleaned with a cleaning-solution or a desinfectant. Acids will make the
stainless steel corrode and are therefore not recommended to use.
-
Check regularly if the waterlevel isn’t too high because of the sealing off of the aircirculation.
7.1.
Warnings
-
When the exhaust is blocked, or the airflow severely deranged, accuracy of the temperature will
decrease.
-
Maximum 600W can be connected to the AC-outlet (optional).
-
The cabinet must be cleaned thoroughly on a regular basis, to secure optimal functioning.