SNIJDERS SCIENTIFIC
B.V.
ISO9001 certified by Lloyd’s
Economic Premium ECP01E, March ‘06
Page 11 of 22
Subject to change
-
shift the decimal point using
-
the new output is accepted automatically after about 2 sec or by using
-
by pushing the display of channel 2 appears (humidity)
-
set % humidity in this channel by repeating steps above.
Note: only when the Economic Premium is executed with the optional dimfunction or/ and
CO
2
injection & measurement.
-
by pushing the display of channel 3 appears (percentage dimming of the light)
-
set % light in this channel by repeating steps above
-
by pushing the display of channel 4 appears (CO
2
in ppm)
-
set ppm CO
2
in this channel by repeating steps above.
5.1.
Changing temperature, humidity or lightcontacts (optional dimfunction, CO
2
injection
& measurement)
-
Push on the button
.
-
Open the screen “Operation level” and push
.
-
Open the screen “Systemstate manual” and push
.
Now you can choose for:
-
open the screen “Program channel 1” for the temperature or
-
open the screen “Program channel 2” for the humidity or
-
open the screen “Control contact” for the light position 1-4 or
-
open the screen “Program channel 3” for the dimfunction or
-
open the screen “Program channel 4” for the CO
2
injection & measurement.
-
By pushing the values can be increased and decreased, the light contacts can be set
ON or OFF by pushing the keys , followed by
Note: when the controller hasn’t been touched for 15 minutes, automatically the screensaver
will start up. By pressing a soft key (5), the screensaver will go off.
-
By pressing
the manual mode stops and the symbol of the manual mode will disappear.