manualshive.com logo in svg

Snell MV-32, Руководство пользователя

Поделиться
Скачать
Snell MV-32 Скачать руководство пользователя страница 68

MV-32/64 Multiviewer

www.snellgroup.com

Operation

Issue 1 Rev 11

Page 68

© 2014 Snell Limited

4.16.5.5

Tally Properties Tab (Video object)

This tab only exists in tiles that are of Video type.

Fig 55. Edit Object - Properties - Tally Tab. 

Enabled

Turns the display of the tally on/off.

Left-right sources

Select hardware, or one of two software tallies. The hardware tally is 
the GPI tally that has been set up for the video source of the tile. This 
GPI to source assignment is configured in the GPI Inputs panel (in 
menu Module > Setup Module, then in the Module Properties window, 
in the GPIs tab, GPI Inputs tab. For each applicable GPI, select a 
Source … Hard Tally here).

The two software tallies operate in accordance with TSL protocol. 
This has up to 127 display addresses; each address comprising 4 
tallies and a UMD. The address assigned to a source depends on 
how the TSL Protocol has been configured (see section 4.11.10.1 for 
details of the TSL Protocol Options).

Each video window can use the first 2 tallies of its display address to 
trigger the 2 tallies available in its UMD bar, or the border tally if set 
up appropriately. 

Style

Select red-green, green-red, red-red and green-green.

Shape

Select fill, square or round.

Position

Select UMD, border or UMD and border.

Disabled

Sets the disabled color to either default disabled color, UMD color, 
border color, or the user selected color set in the box below this 
control

Colour

Selects disabled color if disabled color is set to the user-selected 
source.

Table 38.

Edit Object - Properties - Tally Tab. 

Содержание MV-32









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды