MC1000/MC1000-IQ/MC2000/MC2000-IQ
RollCall Control Panel System Setup Screens
Issue 1 Rev 8
Page 94
© 2015 SAM
10.1.3 Channel 1 and Channel 2 Timing
The Timing controls enable you to specify the horizontal and vertical genlock timing for each
channel.
•
Vertical Timing:
Adjusts the vertical timing of the output signal with respect to the
reference signal. The adjustment range is one output line in one-line steps. The
preset value is 0.
•
Horizontal Timing:
Adjusts the horizontal timing of the output signal with respect to
the reference signal. The adjustment range is one output frame in one-pixel steps.
The preset value is 0.
•
Status:
Shows the status of the currently assigned reference. For example, if genlock
is assigned to input 1, Status shows “Ch 1 Input” followed by the current status of the
input. If there is no signal on the assigned reference, Status shows “REF Loss”.
