MC1000/MC1000-IQ/MC2000/MC2000-IQ
Conversion Operational Examples
Issue 1 Rev 8
Page 159
© 2015 SAM
A.5 Using Decoded Dolby E Audio when Converting Video
Example
You want to route the first pair from a decoded Dolby E source, using processing channel 1,
to PCM on SDI output A1 embedded audio pair 1 (assuming only one Dolby option is fitted).
A.5.1 From the Front Panel
1.
On the front panel, press the SYSTEM Shortcut button.
2.
Select Dolby > Dolby Ch 1 > Decoder Source> Embedded 1, then select Done.
3.
Press the HOME button.
4.
Press CH SELECT until the channel 1 LED is illuminated.
5.
Press the AUDIO Shortcut button.
6.
Select Routing > Pair 1 Source > Dolby Decoder 1, then select Done.
Note: This selects pair 1 from the Dolby decoder.
A.5.2 From the RollCall Control Panel
1.
From the System menu list, select Dolby.
2.
In the Dolby Ch 1 Decoder Source box, select Embedded 1.
3.
From the Channel 1 menu list, select Audio Routing.
4.
Next to Dolby Decoder 1, select the radio button under the Pair 1 column.
