IQSDA41/42
Operation Using the RollCall Control Panel
Issue 1 Rev 1
Page 27
© 2017 SAM
5.9 Memory 1-16
The
Memory 1-16
page enables up to 16 configurations to be saved and recalled later.
Default memory names can be changed to provide more meaningful descriptions.
5.9.1 Recall Memory
This column lists the settings that have been previously saved. If no settings have been
saved,
None Selected
is displayed.
To recall the settings saved in a memory:
•
In the
Recall Memory
column, select the memory to recall by clicking on it. The
recalled settings will be applied and the memory name will appear in the
Last
Recalled Memory
section.
5.9.2 Save Memory
This column lists the 16 pre-set memory names that are available for use.
To save settings:
•
In the
Save Memory
column, select a memory location, and then click
Save
. The
current settings are saved and the memory appears in the
Recall Memory
column.
To clear a memory location:
•
In the
Save Memory
column, select a memory location, and then click
Clear
. The
current settings stored for that memory are cleared. After you clear a memory
location, it disappears from the
Recall Memory
list.
Note:
User memories do not recall log field “states” – that is, whether a log value has been
enabled or disabled.
