IQSDA41/42
Operation Using the RollCall Control Panel
Issue 1 Rev 1
Page 19
© 2017 SAM
5.4 Setup
The
Setup
page displays basic information about the module, such as the serial number and
software versions. Use the functions on the page to restart the module or return all settings to
their factory or default settings.
•
Product:
Name of the module.
•
Software Version:
Currently installed software version number.
•
Serial No:
Module serial number.
•
Build:
Factory build number. This number identifies all parameters of the module.
•
OS:
Operating system version number.
•
PCB:
Printed Circuit Board revision number.
•
PCB Mods:
PCB modification level.
5.4.1 Default Settings
The
Default Settings
button enables module settings to be reset to their factory defaults,
leaving user memories intact.
5.4.2 Factory Defaults
The
Factory Defaults
button enables the module settings to be reset to their factory defaults.
5.4.3 Restart
Click
Restart
to power cycle the module.
Note:
Resetting the module to its factory defaults also clears all the saved memory settings.
