Snapper SPE361, Инструкции по безопасности и руководство оператора

Страница: 6 / 34

6
SECTION 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER PRO GEAR WALK BEHIND MOWER. Its
purpose, aside from recommending standard operating
procedures and routine service requirements, is to promote
SAFETY through the use of accepted operating practices.
Read, Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 thru 4 of this manual and All
SAFETY messages on the PRO GEAR WALK BEHIND
MOWER and its attachments before operating. SNAPPER
recommends returning the MACHINE to an authorized
SNAPPER dealer annually for inspection and addition of any
new devices which might upgrade the safety of the mower.
1.2 NOMENCLATURE
It is recommended that all operator’s of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are found
in the separate engine owner’s manual. Study these
manuals before operating and keep both handy for future
reference. For the nearest SNAPPER dealer in your
area, check the yellow pages under the heading LAWN
MOWERS. For engine parts and service, look for the
engine manufacturer’s dealers under the heading,
ENGINES - gasoline.
TRACTION
LOCK
TRANSMISSION SHIFT
LEVER
KEY
SWITCH
OPERATOR’S
PRESENCE
CONTROL (OPC)
L.H. TRACTION
LEVER
ENGINE SPEED
CONTROL
STARTER ROPE
AIR FILTER
MUFFLER
DECK COVER
DECK
(36” SHOWN)
FRONT TIRES
DECK HEIGHT
ADJUSTMENT SPACERS
CASTER
WHEEL
ASSEMBLY
DISCHARGE
DEFLECTOR
REAR TIRES
COVER
RETAINING
KNOBS
BELT
COVER
FUEL
CAP
R.H. TRACTION
LEVER
OIL DIPSTICK