background image

 

IMPORTANT SAFETY INSTRUCTIONS 

 

PREPARATION 

(Continued From Previous Page) 
11. 

Protect yourself when mowing and wear 
appropriate clothing including safety glasses, long 
pants, ear protection, hardhat and substantial 
footwear with good traction. Long hair, loose 
clothing or jewelry may get tangled in moving 
parts. 

12. Know how to STOP blades and engine quickly in 

preparation for emergencies.  

13. Use extra care when loading or unloading the 

machine into a trailer or truck. 

14. Check grass catcher components frequently for 

signs of wear or deterioration and replace as 
needed to prevent injury from thrown objects 
going through weak or worn spots. 

 

OPERATION  

1.  DO NOT put hands or feet near or under rotating 

parts. Keep clear of the discharge area while the 
engine is running. 

2.  BEFORE STARTING ENGINE, blades must be OFF 

and Traction Levers LOCKED in the Traction Lock 
position. 

3.  Stop Blades when crossing gravel drive, walks, 

and under any conditions where thrown objects 
might be a hazard. 

4.  DO NOT raise deck with the blades running. 
5.  Mow only in daylight or good artificial light. 
6. USE EXTRA CARE when approaching blind 

corners, shrubs, trees or other objects that may 
obscure vision. 

7.  DO NOT operate the machine while under the 

influence of alcohol or drugs. 

8.  After striking a foreign object or if the mower 

vibrates abnormally, STOP the blades and engine. 
Remove the key. Disconnect and secure the spark 
plug wire. Inspect the mower for any damage and 
repair the damage. 

9.  DO NOT operate machine near drop offs, ditches, 

embankments, washouts culverts, fences and 
protruding objects. STAY ALERT for holes and 
other hidden hazards. Tall grass can hide 
obstacles. 

10.  DO NOT operate machine on wet grass. Always be 

sure of your footing while operating machine, 
especially while backing up. Keep a firm grip on 
the handle. Walk: never run. Slipping and falling 
could cause injury. 

11.  DO NOT leave the machine with the engine 

running. STOP BLADES, STOP ENGINE and 
REMOVE KEY before leaving the operator position 
for any reason. 

 
 
 
 

OPERATION  

(Continued From Previous Column) 

10.  Before cleaning, repairing, or inspecting make 
certain blades, engine and all moving parts have 
STOPPED. Remove key and secure spark plug 
wire away from spark plug key to prevent 
accidental starting. 
11.  STOP MACHINE on level ground, engage 
parking brake (if equipped) and make sure engine 
and blades have stopped before leaving the 
operator’s position for any reason including 
removing grass catcher or unclogging mower to 
prevent injury to hands or feet. 
12.  Blades must be OFF except when cutting 
grass. Set blades in highest position when 
mowing over rough ground.  
13.  Keep hands and feet away from rotating 
blades underneath deck.  
14.  DO NOT operate machine without entire grass 
catcher or guards in place. DO NOT point 
discharge at people, passing cars, windows or 
doors.  
15.  Slow down before turning. 
16.  Watch out for traffic when near or crossing 
roadways.  
17.  Move motion control levers SLOWLY to 
maintain control during speed and directional 
changes. 
18.  DO NOT operate engine in enclosed areas.  
Engine exhaust gases contain carbon monoxide, a 
deadly poison.  

 

MAINTENANCE  

1.  Shut off fuel while storing or transporting. DO 

NOT store machine or fuel container inside where 
fumes may reach an open flame, spark or pilot 
light such as in a water heater, furnace, clothes 
dryer or other gas appliance. Allow engine to cool 
before storing machine in an enclosure. Store fuel 
container out of the reach of children in a well 
ventilated, unoccupied building.  

2.  Clean grass and debris from engine, mufflers, 

drives and cutting units to help prevent fires. 
Clean up fuel, oil and excess grease. 

3.  When draining fuel tank, drain fuel into an 

approved container outdoors and away from open 
flame.  

4.  Check brakes frequently (if equipped); adjust, 

repair or replace as needed. 

5.  Keep all bolts, nuts and screws properly tight. 

Check that all cotter pins are in proper position.  

6.  Always provide adequate ventilation when running 

engine. Exhaust gases contain carbon monoxide, 
an odorless and deadly poison.  

 
 
 
 

Содержание SPE361



































Отзывы: