background image

warranty statement    

5

11

2 YEAR LIMITED WARRANTY

For two (2) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any
authorized SNAPPER dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon
examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both.

For one (1) year from purchase date for the original purchaser's commercial, non-residential use, SNAPPER, through any
authorized SNAPPER dealer will replace, free of charge, any part or parts found upon examination by the factory at
McDonough, Georgia, to be defective in material or workmanship or both.  

For ninety (90) days from purchase date for the original purchaser's rental use, SNAPPER, through any authorized SNAP-
PER dealer will replace, free of charge, any part or parts found upon examination by the factory at McDonough, Georgia,
to be defective in material or workmanship or both 

All transportation costs incurred by the purchaser in submitting material to an authorized SNAPPER dealer for replace-
ment under this warranty must be paid by the purchaser.

This warranty does not apply to certain transmissions, to engines and their components, and batteries, as these items are
warranted separately.  This warranty does not apply to parts that have been damaged by accident, alteration, abuse,
improper lubrication, normal wear, or other cause beyond the control of SNAPPER. This warranty does not cover any
machine or component part that has been altered or modified changing safety, performance, or durability.

Batteries have a one (1) year warranty period with free replacement if required for one (1) year from the original purchase
date. SNAPPER will not be responsible for any installation cost incurred. The battery warranty only covers original equip-
ment batteries and does not cover damage to the battery or machine caused by neglect or abuse, destruction by fire,
explosion, freezing, overcharging, improper maintenance, or use of improper electrolyte.

There is no other express warranty.

DISCLAIMER OF WARRANTY
Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to two (2) years from
purchase date for the original purchaser's residential or other non-commercial use, and one (1) year from purchase for the
original purchaser's commercial, non-residential use, and ninety (90) days from purchase for the original purchaser's rental
use and to the extent permitted by law, any and all implied warranties are excluded. This is the exclusive remedy. Liabilities
for consequential damages, under any and all warranties are excluded.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

WARNING: THE USE OF REPLACEMENT PARTS OTHER THAN GENUINE SNAPPER PARTS MAY IMPAIR THE
SAFETY OF SNAPPER PRODUCTS AND WILL VOID ANY LIABILITY AND WARRANTY BY SNAPPER ASSOCIATED
WITH THE USE OF SUCH PARTS.

IMPORTANT:  Please fill out the SNAPPER Product Registration Card immediately and mail to: 

Snapper's Product Registration Center, P.O. Box 1379, McDonough, Georgia 30253

Содержание 7011299

























Отзывы: