Snapper 5900528 Скачать руководство пользователя страница 29

Страница: 29 / 48

Not for

Reproduction

Regular Maintenance

Figure 31. Tightening the Mower Blade for

Installation

A. Mower Blade Mounting Bolt

B. Flat Washer

C. Mower Blade Air Lift (Points Up For Installation)

D. 4 X 4 Wooden Block

Sharpening the Mower Blade

1. Sharpen the mower blades with grinder, hand file, or

electric blade sharpener.

2. Sharpen the mower blade by removing an equal amount

of material from each end of the mower blade.

3. Keep the original bevel (A, Figure 29) when grinding.

DO NOT change the mower blade bevel.

4. The mower blade should have a maximum 1/64” (0,40

mm) cutting edge (B) or less.

5. Balance the mower blades before installing.

Balancing the Mower Blades

1. Clean the mower blade to remove any dried grass or

other debris.

2. See Figure 30. Put the mower blade on a nail in a vise

and turn the mower blade to the horizontal position.

3. Check the balance of the mower blade. If either end

of the mower blade moves downward, sharpen the

heavy end until the mower blade is balanced.

See

Sharpening the Mower Blades

for proper sharpening

instructions.

4. Repeat the process until the mower blade remains in the

horizontal position.

Reinstalling the Mower Blades

1. Reinstall each mower blade with the air lifts pointing up

towards the mower deck as shown in Figure 31.

36” Models:

Make sure the blade is firmly seated

in the blade saddle. Secure with the mower blade

mounting bolt and flat washer (A & B, Figure 31) and

torque to 70 ft. lbs (94 Nm).

48” Models:

Secure with the mower blade mounting

bolt and flat washer (A & B, Figure 31) and torque to 70

ft. lbs (94 Nm).

2. If there are no flats on the spindle shaft, wedge a

wooden block between the mower blade and the mower

deck housing to keep the mower blade from turning.

CAUTION

Avoid injury! Mower blades are sharp.

• Always wear gloves when handling the mower

blades.

• Always wear safety eye protection when grinding.

CAUTION

Avoid injury! Keep mower blades balanced.

• An unbalanced mower blade can create excessive

vibration and damage the unit or cause mower blade

failure.

Figure 29. Sharpening the Mower Blade

A. Mower Blade Bevel

B. Mower Blade Cutting Edge

Figure 30. Balancing the Mower Blade

A. Nail

Содержание 5900528

















































Результаты поиска

Содержание 5900528

Отзывы:

Похожие инструкции для 5900528

Бренды по названию

Популярные бренды

Snapper 5900528, Руководство оператора

Результаты поиска

Содержание 5900528

Отзывы:

Похожие инструкции для 5900528

Бренды по названию

Популярные бренды