Snapper 5900528 Скачать руководство пользователя страница 37

Страница: 37 / 48

Not for

Reproduction

Regular Maintenance

5-7/8”

(14.92 cm)

Figure 45. Hydraulic Pump Drive Belt Replacement

A. Pump Drive Belt

B. Crankshaft Pulley

C. Pump Pulley

D. Idler Pulley

E. Idler Arm

F. Spring

G. Spring Anchor Eyebolt

H. Stationary Idler Pulley

Hydraulic Pump Drive Belt
Replacement

1. Park the tractor on a smooth, level surface such as a

concrete floor. Disengage the PTO, engage the parking

brake, turn off the engine, and remove the ignition key.

2. Remove the PTO drive belt (see MOWER BELT

REPLACEMENT for removal instructions).

3. Loosen and remove the crankshaft bolt (C, Figure 44)

and the PTO clutch (B) from the engine crankshaft.

4. Loosen the nut on the spring anchor eyebolt (G, Figure

45) to release the majority of the belt tension. Use

caution and remove the nut to completely release the

tension.

WARNING

STORED ENERGY DEVICE: Improper release of the belt

tension spring can result in personal injury.

Use extreme caution when removing this spring.

5. Remove the old belt and replace it with the new one.

Make sure the V-side of the belt runs in the grooves of

the crankshaft pulley and the transmission pulleys (B &

C).

6. Reinstall the spring anchor eyebolt (G) into the anchor

tab and loosely fasten the nut. Adjust the anchor

eyebolt until a measurement of 5-7/8” (14,92 cm) is

achieved from the outside if the spring hooks. Tighten

nut.

7. Reinstall the PTO clutch to the engine crankshaft and

secure with the crankshaft bolt. Tighten the crankshaft

bolt to 65 ft. lbs (88 Nm).

NOTE: Make sure that the slot in the PTO clutch
lines up with the PTO clutch mounting tab (A, Figure
44) underneath the engine deck.

8. Reinstall the PTO drive belt.

Figure 44. Removing the PTO Clutch

A. PTO Clutch Mounting Tab

B. PTO Clutch

C. Crankshaft Bolt

Содержание 5900528

















































Результаты поиска

Содержание 5900528

Отзывы:

Похожие инструкции для 5900528

Бренды по названию

Популярные бренды

Snapper 5900528, Руководство оператора

Результаты поиска

Содержание 5900528

Отзывы:

Похожие инструкции для 5900528

Бренды по названию

Популярные бренды