SnapNrack Series 100 UL, Руководство по установке

Страница: 28 / 48

METAL OR
STEEL ROOF
MANUFACTURER
PANEL NAME CLAMP
AEP Design Span HP Standard Base
AEP Span-Lok Wide Base
American Buildings Standing Seam II Standard Base
Behlen ZL-24 Triple Lock Wide Base
Berridge Zee-Lock Wide Base
Borga Tioga Standard Base
Butler MR-24 Standard Base
Custom Bilt Metals SL-1750 Standard Base
Custom Bilt Metals CB-2000 Single Lock Wide Base
Custom Bilt Metals CB-2000 Double Lock Standard Base
Everlast Everseam Standard Base
Fabral Thin Seam Standard Base
Fabral Stand ‘N Seam Standard Base
Mastercraft Metals Seam-Loc 1000 Wide Base
Mastercraft Metals Seam-Loc 1500 Wide Base
Mastercraft Metals Seam-Loc 2000 Wide Base
MBCI Double-Lok Standard Base
MBCI SuperLok Standard Base
MBCI LokSeam Wide Base
MBCI Ultra-Dek Standard Base
MBCI BattenLok Wide Base
McElroy MasterLok FS Standard Base
McElroy Maxima Wide Base
Merchant & Evans Zip-Lok Single Lock Standard Base
Merchant & Evans Zip-Lok Double Lock Standard Base
Metal Sales MagnaLoc Wide Base
Metal Sales Vertical Seam Standard Base
Nucor CFR Vise Lock Wide Base
Nucor VR-16 II Vise Lock Wide Base
VP Buildings SSR Standard Base
Whirlwind Super Seam II Standard Base
28
3) Tighten hardware
1) Assemble seam clamp 2) Attach seam clamp
Series 100 UL
Seam Clamp
Design Tools
- SnapNrack has a suite of design tools
to help configure your PV installation to
be an accurate and fast install. Please
visit us at: www.SnapNrack.com.
Warning
- Do not over tighten hardware.
- Always wear fall protection
and safety gear.
Notes
- SnapNrack engineered systems should
only be used with SnapNrack components
and hardware. Any alternate application
may void the warranty and structural
calculations could become invalid.
Step-by-Step Instructions
1) Assemble the seam clamp components to
be ready to attach to standing metal seam.
2) Attach the seam clamp to the
standing metal seam by loosening the
seam clamp bolt then opening the seam
clamp cam and placing the clamp over
the top of the standing metal seam.
3) Tighten remaining hardware in the
L-Foot assembly. Tighten both silver
and black hardware to 10-16 ft-lbs.
SnapNrack Seam Clamps have been
designed to work with a variety
of standing seam metal roofs, the
most common seam types are:
Snap Lock Single Lock Double Lock
If a specific roof seam is not
found on list, contact SnapNrack
prior to installation.
Example Standing Seam