Snap-On EEWB334A, Руководство по эксплуатации

Страница: 41 / 192

41 EEWB334A
5-45
5-46
5-47
5-46a
29 28 1
26
The OPTIMIZATION “OP.9” screen ( Fig. 5-45 ) is displayed.
Fig. 5-45 OPTIMIZATION “OP.9”
START is signalled on the screen.
— Spin the wheel.
A measuring run is performed.
The screen OPTIMIZATION “OP.10”, outside (
Fig.
5-46 ) or the screen OPTIMIZATION “OP.10”, inside
( Fig. 5-47 ) is displayed.
Reading H 0
Optimum condition has been achieved and cannot be
improved.
—
Continue as shown on screen BALANCING
(
Fig. 5-51 ).
Reading H 2
a)
Wheel running conditions cannot be improved.
— Press ESC or BALANCING (1,28, Fig.5-46a) to
quit Optimization.
b)
However, it is possible to readjust the tire relative to
the rim to obtain a quite considerable minimization of
balance weights (i.e. smaller weights) without having
an adverse effect on wheel running conditions.
— Press MINIMIZATION (29, Fig.5-46a)