Snap-On EEWB334A, Руководство по эксплуатации

Страница: 18 / 192

18 EEWB334A
4-17
4-18
4-19
4-19b
1 2
4.3 Main Shaft Lock
Fig. 4-17 Pedal of main shaft lock
The main shaft is locked when the pedal is depressed.
This facilitates tightening or loosening of the clamping
nut and retains the wheel in the correct position for
applying weights.
Note :
This lock is designed only to facilitate orientation
of the wheel and must not be used for braking the
main shaft.
4.4 SAPE Arm
Fig. 4-18 SAPE arm for distance and rim diameter.
1 SAPE arm, can be extended and hinged upwards.
2 SAPE disk to identify rim dimensions on a variety
of rim profi les.
4.5 Sonar Sensor
On the outer side of the rim the machine has a So-
nar sensor to measure wheel width (outside of rim)
(
Fig. 4-19 ).
The sonar has a tolerance of +/- 0.5’’.
4.6 Laser Pointer
Fig. 4-19b
The machine uses the Laser Pointer to indicate a
precise point for placing adhesive weights on the rim.