Page 14
5.0 CALIBRATION VERIFICATION - P14
The EEWB308A Balancer features a user calibration veri-
fication program which requires only a few minutes to
complete. Perform this procedure when the balancer
has been moved, disturbed, or whenever accuracy is
questioned. Using calibration verification will ensure
years of reliable service. If the P80 distance calibration
has not been performed, do so before proceeding with
P14 checks.
Follow these 3 simple steps:
1. Activate Calibration Verification
. Press and hold
the
P
button while rotating the shaft until the display
reads “P” “14”. See Figure 15 item “1”.
•
Once P14 activates, the display will read
"CAL" " GAN" for one second.
•
The display will then read "SPN" " 1 ".
•
Mount a balanced wheel assembly.
2. Spin shaft with wheel only
- Figure 16
•
Spin shaft CW, when standing in front of wheel.
•
Displays "SPN" "UP " when shaft reaches 60 rpm.
•
Displays "COA" "ST " with a beep if shaft speed has
exceeded 120 rpm and will continue until speed drops
to 119 rpm.
•
Displays "CAL" " 1" when the speed drops to 119
rpm. The machine is taking data and doing calcula-
tions. After taking data, shaft is automatically braked
to a stopped.
•
Displays "SPN" " 2" when shaft stops.
3. Spin shaft with calibration slug on the left side
.
Mount calibration slug to shaft. See Fig 17.
•
Displays "SPN" "UP " when shaft reaches 60 rpm.
•
Displays "COA" "ST " with a beep if shaft speed has
exceeded 120 rpm and will continue until speed drops
to 119 rpm.
•
Displays "CAL" " 2" when the speed drop down to
119 rpm. At this moment the machine is taking data
and doing calculation work. After taking data, shaft is
automatically stopped.
•
Displays "CAL" "FIN " when the second step of cali-
bration is finished and machine says the calibration
result is
FINE
.
•
Displays "---" "---" when shaft stops and machine is
in the idle state.
NOTE:
Error messages will be displayed in the event
problems are indicated during the calibration verification
process. In the event of errors, contact your service rep-
resentative.
Figure 15
Figure 16 - Shaft with adapter and wheel
Figure 17 - Calibration Weight attached
1
Содержание EEWB308B
Страница 1: ...EEWB308B COMPUTER WHEEL BALANCER FOR MOTORCYCLE WHEELS OPERATION INSTRUCTIONS Form ZEEWB308B ...
Страница 2: ......
Страница 19: ...NOTES ...
