Snap-On EEWB308B, Руководство по эксплуатации

Страница: 11 / 20

Page 9
Model EEWB308B Operators Manual
3.0 TERMINOLOGY
Figure 9
Before using the wheel balancer it is suggested that you
become familiar with the terminology and features of the
machine’s components. Refer to Figures 9 and 10 for
identification and location.
DISPLAY - Figure 9
1.
Parameters - Rim Offse t - Key is used to enter the
rim offset position using numbers from the distance
gauge.
Rim Diameter - Enter the rim diameter.
Read the size stated on the tire sidewall. Rim Width
- Press this key to enter the rim width. Use the rim
width calipers for measurement.
2. Inside Weight Amount and Function Display Win-
dow
- Shows inside or left weight amount and vari-
ous operation messages.
3. Position Indicator LEDs - Displays the location for
wheel weight placement.
4. Middle Display - Used to display wheel parameters
or messages.
5. Outside Weight Amount and Function Display
Window
Shows outside or right weight amount and
various operation messages.
6. Function Button - Used to activate the various func-
tions. Press this button followed by rotating the
shaft until the desired number is displayed. Releas-
ing the “P” button actives the function.
7. Cancel - Pressing this key interrupts any process.
8. Mode Selection - A series of placement locations
for custom weight location. Useful for the wide vari-
ety of custom wheels on today's market.
9. ALU-S and Spoke Mode - Activates the ALU-S or
Spoke Mode. Each time this button is pressed pro-
gramming toggles between the two.
10. Weight Mode and Placement Display - Displays
a pictorial reference of the chosen balance mode.
11. Multi-Operator Selection - This key toggles be-
tween four operators designated as a, b, c, and d.
Wheel parameters are recalled upon command.
12. Fine Weight Toggle - In normal mode “FIN OFF”
round off is 0.25 oz or 5 gram, fine mode “FIN ON”
round off is 0.05 oz. or 1 gram.
13. Oz/Gr - Toggles between display values in Ounces
or Grams.
CABINET - Figure 10
14. Display
- Easy to read, user friendly display featur-
ing large LEDs and one button functions.
15. Weight Storage Tray - Generous storage for a vari-
ety of weight profiles and sizes as well as built in
storage pockets for the standard centering cones.
16. Accessory Storage - Four sturdy side mounted pegs
are supplied for storage of additional accessories.
17. Foot Operated Shaft Lock - A foot operated shaft
lock is used to stabilize the shaft during the weight
placement process.
18. Shaft Adapter - Flange and 14mm shaft made for
balancing Motor Cycle wheels.
19. Semi-Automatic Parameter Arm - Rim distance
is automatically input with the SAPE. The SAPE is
also used in several procedures for determining ac-
curate rim profiles.
Figure 10