Snap-On 870599 Скачать руководство пользователя

Страница: 5 / 44

DANGER

indicates an imminently hazardous

situation which, if not avoided, will result in death

or serious injury.

WARNING

indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

CAUTION

indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury.

CAUTION

used without the safety alert symbol

indicates a potentially hazardous situation which,

if not avoided, may result in property damage.

NOTE

provides additional information that is useful

for proper use and maintenance of this tool. If a NOTE

is indicated, make sure it is fully understood.

In addition to

SAFETY ALERTS

listed above, there could also be numerous symbols

alerting the operator that specific safety measures are required to safely operate this

tool. Learn these

SAFETY SYMBOLS

as well as the

SAFETY ALERTS

to prevent

injury to the operator and to bystanders.

READ OPERATING INSTRUCTIONS:

Read and understand tool labels,

safety warnings and precautions in this manual before operating the tool.

Failure to follow WARNINGS could result in serious injury or even death

to the operator or bystanders.

FIRE HAZARD:

Heat from engine exhaust can ignite combustible materi-

als, building structures or gas tanks resulting in a fire. Place the tool on

a flat surface a safe distance from buildings or other combustible

material. Ensure exhaust is directed away from tool.

ELECTRICAL SHOCK:

This tool produces hazardous electrical voltage.

Read and become familiar with this manual’s WARNINGS and CAUTIONS

so that it is installed and used properly.

WEAR APPROVED EYE PROTECTION:

This tool has rotating and moving

parts that could become airborne if damaged. Always wear approved eye

protection when operating equipment with moving parts. Safety glasses

must conform to the requirements of American National Standards

Institute (ANSI) Z87.1 and provide protection against flying particles

from both front and side.

POISONOUS FUMES:

This tool uses a gasoline powered engine that

produces poisonous fumes from its exhaust. Always make sure there is

adequate ventilation when operating this equipment.

Содержание 870599













































Результаты поиска

Содержание 870599

Отзывы:

Похожие инструкции для 870599

Бренды по названию

Популярные бренды

Snap-On 870599, Инструкция по эксплуатации

Результаты поиска

Содержание 870599

Отзывы:

Похожие инструкции для 870599

Бренды по названию

Популярные бренды