Snap-On 870599 Скачать руководство пользователя

Страница: 42 / 44

G. Throughout the ECS Warranty Period, Alltrade shall maintain a supply of warrant-

ed emission-related parts sufficient to meet the expected demand for such parts.

H. Any Alltrade authorized and approved emission-related replacement parts may

be used in the performance of any ECS warranty maintenance or repairs and will

be provided without charge to the purchaser/owner. Such use shall not reduce

Alltrade ECS Warranty obligations.

I. Unapproved, add-on, modified and/or counterfeit parts may not be used to modi-

fy or repair an Alltrade engine. Such use voids this ECS Warranty and shall be suf-

ficient grounds for disallowing an ECS Warranty claim. Alltrade shall not be held

liable hereunder for failures of any warranted parts of Alltrade equipment caused

by the use of such an unapproved, add-on, modified and/or counterfeit part.

EMISSION RELATED PARTS MAY INCLUDE THE FOLLOWING (IF INCLUDED ON

THIS ENGINE):

1. Fuel Metering System

a. Carburetor and internal parts

b. Fuel Regulator

2. Air Induction System

a. Intake manifold

b. Air filter

3. Ignition System

a. Spark plugs

b. Magneto ignition system

4. Air Injection System

a. Air cleaner

5. Exhaust System

a. Catalyst

b. Exhaust Manifold

6. Miscellaneous Items

a. Fittings, tubing, connectors and assemblies.

TO OBTAIN WARRANTY SERVICE:

If you have any questions regarding this warranty or if your equipment requires a

covered repair, please contact us at the address below.

Содержание 870599













































Результаты поиска

Содержание 870599

Отзывы:

Похожие инструкции для 870599

Бренды по названию

Популярные бренды

Snap-On 870599, Инструкция по эксплуатации

Результаты поиска

Содержание 870599

Отзывы:

Похожие инструкции для 870599

Бренды по названию

Популярные бренды