Snap-On 870599, Инструкция по эксплуатации

Страница: 24 / 44

USING THE SPRAY GUN
To prevent accidental discharge of high pressure water,
the trigger lock on the trigger should be engaged whenever the pressure
washer is not in use.
To disengage the Trigger Lock, push the lock down and into its original position.
TO OPERATE THE TRIGGER:
1. Squeeze the trigger to start water flow through the
nozzle.
2. Release the trigger to stop water flow.
WASHING / CLEANING
SOME ENGINE PARTS CAN BECOME EXTREMELY HOT.
Do not allow the pressure hose come in contact with engine exhaust system
which can cause damage to the hose. Damaged hoses can burst and can cause
injection injuries.
1. Firmly grip Spray Gun with both hands.
2. Point the nozzle to a safe direction and
squeeze the Spray Gun trigger to allow the
pump to purge air and impurities in the
system and then redirect the the nozzle to
the working surface.
3. When finished, release the Gun
Trigger to stop water flow.
TRIGGER LOCK
TRIGGER
22