Snap-on Equipment EEWA717A, Руководство оператора

Страница: 43 / 66

1
2
All Readings Screen
After Front Readings the final readings
screen is called All Readings . This screen
shows all alignment readings numerically
in a chart format. The numbers are color
coded to indicate the reading’s relationship
to specifications.
NOTE: Pressing “OK” on this screen saves
the alignment if Customer information has
been entered. The process is then prompted
back to the Main Screen where the alignment
can be resumed or a new alignment can
begin.
A scroll bar on the right side of the screen
indicates there is more information below.
Click on the down arrow of the scroll bar to
reveal Front and Rear Diagnostics values (if
measured).
After readings have been observed, other
measurements or adjustments may be
required for completion of the alignment
process. Determine additional measurements
(1) or adjustments,(2) or select other features
to complete the process.
Other features are:
Return to Home
Print Results
Measure
Adjust
- or -
Loop Button
There are four possible “readings” screens – 3-D Read-
ings, Rear, Front, and All Readings. These 4 screens
can be “looped” from the All Readings screen. When
the All Readings screen is displayed, the 3-D, Rear
and Front Readings screens are retrieved by press-
ing the “Loop” button located at the lower left corner
of the screen.
41