Snap-on Equipment EEWA717A, Руководство оператора

Страница: 26 / 66

Operation
4. Push the lower claws into place. Again, it may
be necessary to pop them in further for security.
Continue tightening the knob until secure.
5. Test the security by pulling outwards on the clamp.
If it comes off easily, reattach the clamp or select
an alternative mounting method.
To grab the wheel from the inside out using the
outer lip of the rim, use the following steps:
1. Extend the clamp inwards to a size smaller than
the rim by turning the knob clockwise.
2. Place the lower claws on the wheel lip at the bot-
tom of the wheel. If a wheel weight is in the way,
move the clamp slightly to clear the weight. It is
not necessary to be perfectly vertical.
3. Tighten the clamp by turning the knob counter
clockwise until the upper claws engage the rim.
Continue to tighten until the clamp is secure.
4. Test the security by pulling outwards on the clamp.
If it comes off easily, reattach the clamp or select
an alternative mounting method.
24