Snap-on Equipment EELR587A, Инструкция по установке и эксплуатации

Страница: 52 / 84

52 of 84
15.0 TROUBLE SHOOTING
PROBLEM REASON SOLUTION
Motor does no turn. Bad fuse or circuit breaker. Replace fuse or reset breaker.
Incorrect voltage to motor. Provide proper voltage to motor.
Incorrect wiring. Have certified electrician check
Motor switch is malfunctioning Replace motor switch.
Motor burned out Replace motor.
Motor runs but lift Low oil level Fill reservoir with proper
doesn't go up . hydraulic oil.
Wrong rotation Check for oil flow & reverse
electrical leads
Lift doesn't come
down.
Dirt in hydraulic lines
*Secure vehicle on lift and refer to
section 14.0 Lock Out and Tag
Out Instruction. Contact
customer service.
Check power to hydraulic lines
No power to solenoids Check power to solenoids
Safety doesn't Lift not raised high enough for Press Up button for longer
disengage . disengagement period of time .
Air not supplied to air cylinder Check if supply line has air.
Air cylinder malfunctioning Replace air cylinder.
Lift goes up un-level. Flow-divider defective Reverse hydraulic connections
Remove & inspect flow through
Blockage in hydraulic hose line
Anchor Bolts do not Holes are to large. Relocate lift using proper drill
stay tight Size.
Incorrect concrete floor Concrete should be replaced by
specification. (Thickness and an appropriate concrete pad .
Strength) (Consult Product Manufacturer /
Supplier for further details)
Airline doesn’t Polytubes broken
STD refers to EAZ0119V62A
work fine.
L&L refers to EAZ0119V63A