5
the levelling feet: by turning them clockwise – the front of the appliance rises, by turning
them counter clockwise – it comes down. If the appliance is tilted slightly backward –
the doors will close by themselves.
•
If the appliance is placed in a corner, a gap must be left between the appliance body
and the wall so that the freezer compartment door can be opened enough to pull out the
frozen product drawer (see fig.).
Preparing for operation:
It is recommended to prepare the appliance for operation with a helper.
•
The apppliance must only be transported in its vertical position; do not tilt any more than
30°.
•
Remove package. Lift the appliance away from foamed polystyrene base. Tear off
adhesive tapes. Remove all red-coloured parts from the shelves. NOTE. When you open
the freezer compartment door a little red packing detail will fall out – it is for
transportation purposes only.
•
When positioning the appliance F 22SM and F
27SM in chosen location, it will move more easily
into position if you lift the front a little and incline
it backward, allowing it to roll on its casters.
When placing, moving, lifting the appliance,
do not hold the door handles, do not pull the
condenser at the rear part of the refrigerator and do not touch the compressor
unit.
•
When placing F 22SM and F 27SM take two supports 1 from the bag and insert them
into the guides 2 at the top back part of the appliance.
•
The appliance should not be connected to the mains until all packing and
transport materials aren’t removed. Suitably dispose the packaging material.
First use:
Before using the appliance for the first time, the interior and all internal accessories should
be washed with lukewarm water and some neutral soap to remove the typical smell of a
brandnew product, then dried thoroughly.
F 10SM F 22SM, F 27SM
