10
CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done with a
helper. You will need two spanners No. 8 and No. 10 and a head screwdriver.
When changing the opening direction of the doors, YOU CAN NOT lay the
freezer horizontally!
•
Do the actions below in the order they are listed:
F 22SM, F 27SM:
WARN ING! Turn off the freezer and pull the plug out of the electricity supply outlet.
1. Remove covers c from the inside of the housing and door and the upper bracket 6
together with the nut and washers and the gasket under the bracket.
2. Remove the freezer door 1. Remove the stop plate from the bottom 2. Screw the stop
plate (included in the package) on the opposite side of the door to open the door to the
left.
3. Remove the bottom cover 3 together with the small cover 4.
4. Unscrew the shaft 5 together with the washers on the shaft and the catch 8 from the
lower bracket 6 and screw them to the bracket 7 on the other side of the cabinet
symmetrically to the former position.
5. Push the freezer door onto the bracket 7 on the newly installed shaft 5.
