51
TEXT ENTRY
After a PRIR measurement, you will be prompted to enter the listener’s name and environment; after
an HPEQ measurement, you will be prompted to enter the listener’s name and headphone model. Text
is entered using the number keys
1, 2, 3, 4, 5, 6, 7, 8, 9, 0, (.)
Each key can be pressed several times to choose among several characters; use the
>
key to move to
the next character and all four arrow keys to move the cursor around the text. The
1
and
0
keys must
be pressed four times each to get to their respective numerals, even though they do not represent letters
as well.
Creating new default text
The entry fields in the PRIR and HPEQ screens are blank by default, but it may be convenient to enter
text as a new default. For example, the owner’s name can be set as a default for both entry screens. Or
a company with many users measuring the same room may want that room as a location default. Any
other text can still be entered over any default; default text simply speeds the process for repeated
cases.
To add or change default text, press
MENU-9
. The
ENTER PRIR DETAILS
screen will appear;
enter text as usual. Press
OK
, and the
ENTER HPEQ DETAILS
screen appears; again, enter text as
usual, and press
OK
. The
PASSWORD SETUP
screen then appears; make no entries and press OK.
The new defaults will remain until the Realiser is powered down; to save them permanently, press
(!)
and
SAVE SYSTEM CONFIG
. (For password information see Password Protection.
