26
SETTING THE CLOCK
The personalisation procedure gathers data in files which are time-stamped. Therefore, the Realiser’s
clock should be set at the outset, before any measurement. In general, the clock will have been set at
the factory, but if not, or if the time zone set does not match yours:
Step 1:
On the remote control, press
MENU-(!)
. The screen will show the date set, or if not set, will
show the following.
> YEAR: 2007
MONTH: 07
DAY: 07
Step 2:
For the line designated by the cursor, use the < and > keys to change the value in that line.
Use the ^ and
v
keys to move the cursor to another line. Set year, month, and day.
Step 3:
Press
OK
. The screen will say:
>HOURS:00
MINS:00
Step 4:
Again use the < and > keys to adjust the values and the ^ and
v
keys to move to the other line. Set hours (24-hour clock) and minutes.
Step 5:
Press
OK
. The date and time are saved and the screen reverts to Preset 1, for example:
1 FACTORY DEF A
SMALL 7.1CH
A 20:54 01-APR-09
. . . . .
