SMS SenTRI2, Руководство по установке, Страница: 40 / 44

40
Tools for SenTRI Sensor
Tools for SenTRI Sensor
An extractor tool allows removal and
fitting of the SenTRI Sensor device
head into the Base. By fitting a screw-on
adaptor, the tool can be used to remove
the sensor dust cover.
To remove an SenTRI Sensor
Fit the tool onto the SenTRI Sensor. Turn
SenTRI Sensor anticlockwise until it stops
and remove the SenTRI Sensor from the
Base.
S-Quad
tool
To fit an SenTRI Sensor
Fit the SensTRI Sensor on to the tool.
Offer SenTRI Sensor to base and rotate
clockwise until it moves upwards in to the
base and rotate it again until it clicks and
goes no further, the lines on the Base and
SenTRI Sensor will align.
Base
S-Quad
Tool
To fit a dust cover
Place the dust cover onto the tool inside
the cradle. Offer the cover to the SenTRI
Sensor, locate and push to fit it onto the
assembly. Withdraw the tool when the
dust cover is in place.
Tool
Dust cover
To remove a dust cover
A dust cover remover tool must be fitted
to the main tool to extract the dust cover.
Press the pad of the dust cover remover
tool onto the dust cover, this creates an
air tight grip, to allow the cover to be
pulled off from the SenTRI Sensor.
Tool
Dust cover
remover tool
Dust cover