www.smoothfitness.com
13
ASSEMBLY
– PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP 2
:
Attach the Left and Right Uprights to the Base Frame
NOTE: Do not fully tighten the bolts at this time.
1). Locate the data cable. Connect the lower data cable( located in the treadmill
base frame) to the middle data cable (located in the right upright)
2). Slide the right upright on to the base frame. Secure the right upright to the base
frame by using 2 x M8*15mm Allen Head bolts, to the front side of the upright and
3x M8*55mm*20mm Allen Head bolts to the side of upright.
3). Repeat the above process for the left side.
M8*15mm
4
M8*55mm*20mm
6
Caution Pinch point! Do not pinch wires between the frame when placing the upright on to the base frame.
ONLY HAND TIGHTEN THE BOLTS
!!Pinch Points!!
Содержание 835BT
Страница 11: ...www smoothfitness com 11 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE ASSEMBLED ...
Страница 26: ...26 835BT TREADMILL COMPUTER OPERATION ...
Страница 42: ......
Страница 43: ......