8
Grill Assembly
8
Grill Assembly
8
Grill Assembly
9
Fig. 8
Grill Assembly
Step 8:
Remove hex nut from Igniter then Insert Igniter
into opening at the front of the Control box then
tight Igniter to the Control panel with hex nut.
(Fig. 8)
Step 9:
Insert the round end of Igniter Wire onto the Igniter
then push other end of the wire into the pin end of
electrode. (Fig. 9)
Fig. 9
Fig. 10
Step 10:
Screw regulator clockwise into burner venturi.
(Fig. 10)
Step 11:
Install
h
eat
t
ent by inserting tabs end into firebox left side through slots. (Fig. 11A) then place
slots
end over the taps on right side of
the
firebox. (Fig. 11B)
Fig. 11A
Fig. 11B
