Assembly
Step 17
:
Attach the Smoke Stack
Locate
: Charcoal Lid Assembly, (1)
Smoke Stack Assembly, (4) M6x15 bolts
and (4) M6 KEPS nuts, and (2) Heat Indi-
cators
Procedure
: Refer to Fig. 17A and unscrew
the dome nut, and remove it and the small
spring which attaches the Cap to the
Smoke Stack.
Insert the Smoke Stack Assembly through
the Lid from the inside as Shown in
Fig.17B .Note: the Smoke Stack Cap at-
taching screw must be located towards
the right hand side of the Lid as shown in
Fig.17C. Attach the Smoke Stack Assem-
bly to the Lid with (4) M6x15 bolts inserted
through the Lid from the
OUTSIDE.
Fas-
ten the Smoke Stack Assembly to the Lid
with (4) KEPS nuts securely INSIDE the
Lid as shown in Fig.17B.
Replace the Smoke Stack Cap as shown
in Fig.17D and the position of the handle
as shown in Fig. 17D.
Unscrew the wing nut and washer from
each of the Heat Indicators as shown in
Fig.17E.
Place (1) Heat Indicator into the area in
the center of EACH Grill Lid and fasten in
place with the washer and wing nut as
shown in Fig.17F.
Step 17
Fig.17 A
Fig.17 B
Fig.17 C
Fig.17 D
Fig.17 E
Fig.17 F
Wing Nut
Washer
18
