Smoker Assembly
Locate:
• Cabinet
• Control Panel Assembly
• Cable Cover
• (12) ST4.2 x 8 Self Tapping
Screws
Tools Needed:
Phillips Screwdriver
Procedure:
Turn the Smoker Cabinet right
side up and put your smoker
stand on the floor. Place two
hooks of Control Panel onto the
Cabinet square holes and push
back into place as shown. Use (2)
ST4.2x8mm Self-tapping Screws
to assemble the Control Panel
Assy into the Cabinet as shown.
Use (10) ST4.2x8mm Self-tapping
Screws to assemble the Cable
Cover into the Cabinet as shown.
Step 3
8
SmokerAssembly
Step 3
Locate:
• Cabinet (16)
• Control Panel Assy (15)
• Cable Cover (14)
• 12pcs ST4.2x8mm Self‐tapping
Screws (B)
Tools Needed:
Phillips Screwdriver
Procedure:
Turn the Smoker Cabinet right
side up and p
ut your smoker
stand on the floor. Place two
hooks of Control Panel onto the
Cabinet square holes and push
back into place as shown. Use (2)
ST4.2x8mm Self‐tapping Screws
to assemble the Control Panel
Assy into the Cabinet as shown.
Use (10) ST4.2x8mm Self‐tapping
Screws to assemble the Cable
Cover into the Cabinet as shown.
8
SmokerAssembly
Step 3
Locate:
• Cabinet (16)
• Control Panel Assy (15)
• Cable Cover (14)
• 12pcs ST4.2x8mm Self‐tapping
Screws (B)
Tools Needed:
Phillips Screwdriver
Procedure:
Turn the Smoker Cabinet right
side up and p
ut your smoker
stand on the floor. Place two
hooks of Control Panel onto the
Cabinet square holes and push
back into place as shown. Use (2)
ST4.2x8mm Self‐tapping Screws
to assemble the Control Panel
Assy into the Cabinet as shown.
Use (10) ST4.2x8mm Self‐tapping
Screws to assemble the Cable
Cover into the Cabinet as shown.
8