smith&nephew TRIGEN SURESHOT, Руководство пользователя

Страница: 19 / 40

17
Navigation screen operation
Overview mode
When the Targeter is greater than 5cm from the
interlocking holes, the navigation screen will
display the IM nail in the overview mode. This
provides the user with a larger field of view in
order to help find the general location of the
interlocking holes.
Note If the desired hole in the nail is not oriented
to be viewed on the screen, then the orientation
of the Targeter is not aligned closely enough
to that specific hole. Try holding the Targeter
generally AP or generally ML to orient the
desired view.
Drilling mode
When the Targeter is moved within 5cm of the
interlocking holes, the navigation screen will
display the IM nail in the drilling mode. This
provides the user with a smaller field of view that
automatically zooms in to the interlocking holes.
The white lines displayed on either side of the IM
nail can be used for targeting blocking screws.
These lines are located 2.5mm from the side of
the IM nail for all IM nails 10mm and larger in
diameter. These lines are located 2mm from the
sides of 8.5mm IM nails.
Drilling mode manual rotation
Each IM nail has several predefined views
that are automatically selected depending
on the position of the Targeter to the IM nail.
Depending on the operating environment, these
predefined views might not be appropriate and
can be manually adjusted.
To rotate the view
Touch the screen near the outside and “drag” the
view in a clockwise or counterclockwise direction.
To flip the view
Touch the “Menu” button and select “Toggle
Back View.”
All changes made for a view are temporarily
stored for that view until program exit.
To reset the view
The default view settings can be restored by
touching the “Menu” button and selecting “Reset
View” or double tapping the center of the screen.