background image

78

 

 

Under no circumstances shall SPYDERCRANE be liable for any consequential or special damages 

which any person or entity may incur or claim to incur as a result of any defect in its product. This 

includes, but is not limited to: the cost of transportation; lost sales, orders, profits, and income; 

increased overhead, labor and materials. Consequential or special damages shall not in any event 

exceed the cost of furnishing the repair or replacement parts deemed defective. SPYDERCRANE

maximum liability under this warranty shall under no circumstances exceed the original purchase 

price of the product.

 

The warranty of all repaired and replaced parts expires at the same time as the original product 

warranty. Upon expiration of this warranty period, as herein above provided, any such liability of 

SPYDERCRANE shall be terminated. 

 

Product Warranty Policies and Procedures

 

Key Components & Elements

 

There are four key components to the SPYDERCRANE North American warranty policy:

 

Product Warranty

 

Warranty Policies & Procedures

 

Warranty Registration Form

 

Warranty Claim Form

 

It is important to be familiar with all of these documents to make sure the warranty process runs 

smooth and to assist SPYDERCRANE in approving warranty claims faster.

 

Only written claims received within 30 days from the date the parts were determined defective shall 

be honored. Claims received after 30 days will be denied based on not being submitted in a timely 

manner. All Claims must be complete and submitted on a current SPYDERCRANE approved 

warranty form. Only one failure may be reported per warranty form.

 

SPYDERCRANE reserves the right to request defective parts back, within 90 days of receiving the 

original claim for inspection before approving any warranty claims. No parts may be returned 

without prior written consent from SPYDERCRANE. All requested parts approved for return must 

be accompanied by a copy of the warranty claim and a complete description of the failure, and must 

be received within 14 days of SPYDERCRANE

s request.

 

Appeals for each warranty request must be in within 30 days from the original SPYDERCRANE 

warranty decision date. After this time, all decisions are final.

 

Warranty Parts

 

All maintenance, wear, repair and replacement parts used during the warranty period must be 

genuine parts from FURUKAWA UNIC, the manufacturer of SPYDERCRANE mini

-

cranes, or 

SPYDERCRANE. Where genuine parts are not available, prior approval is required before 

Содержание SPYDERCRANE PC094
















































































Отзывы: