Smiley Lifting Solutions SPYDERCRANE PC094 Скачать руководство пользователя страница 6

Страница: 6 / 79

GENERAL INFORMATION

Scope

The

SPYDERCRANE PC094 User

’

s Manual

provides operational and basic

service information for the PC094 Pick and Carry Crane. This information includes:

•

Operating Characteristics of the PC094

•

Theory of Operation for the PC094

•

Operating the PC094

•

Transporting the PC094

•

Troubleshooting the PC094

•

Servicing the PC094

This manual should be read carefully by all personnel who will be operating the

PC094. It is CRITICAL that all users understand the procedures and directives

contained within this manual. If any instructions within this manual are unclear or

incorrect, contact Smiley Lifting Solutions immediately.

•

This manual MUST BE read by the following personnel:

•

Personnel who will be operating the PC094 (Operators)

•

Personnel who will be servicing and maintaining the PC094 (Maintainers)

•

Supervisors for PC094 Operators and Maintainers and other Qualified

Persons

•

DO NOT alter this manual in any way.

•

This manual MUST ALWAYS be available to PC094 Operators and Maintainers.

•

This manual MUST stay with the PC094, or be otherwise immediately accessible to

anyone who requires information on the PC094.

•

If the SPYDERCRANE PC094 is sold, the User

’

s Manual and its corresponding

literature MUST accompany the crane.

•

The information within this manual is subject to modification by Smiley Lifting

Solutions without prior notice.

Содержание SPYDERCRANE PC094
















































































Результаты поиска

Содержание SPYDERCRANE PC094

Отзывы:

Похожие инструкции для SPYDERCRANE PC094

Бренды по названию

Популярные бренды

Smiley Lifting Solutions SPYDERCRANE PC094, Руководство оператора

Результаты поиска

Содержание SPYDERCRANE PC094

Отзывы:

Похожие инструкции для SPYDERCRANE PC094

Бренды по названию

Популярные бренды