Installation
20
To convert the regulator to the type of gas
used, the following must be done:
1. Unscrew the cover of the pressure
regulator.
2. Unscrew the plastic regulator stem from the
regulator cap. The configuration “
A
” is for
Natural Gas.
3. Invert the plastic regulator stem to achieve
the configuration “
B
” for Propane Gas and
screw it in tightly.
4. Screw in the regulator stem and cap into its
place.
Replacing the burner nozzles
1. Remove all the grates and all the burner
caps (
1
) and heads (
2
);
Make sure that the holes of the flame-
spreader crowns are aligned with the
thermocouples (
3
) and igniters (
4
).
2. Replace the nozzles
Rapid burner
Unscrew the burner nozzles with a 7 mm
socket wrench and replace them according
to the type of gas to be used and the
description in section “Burner and nozzle
characteristics table”.
Содержание RTU304GX
Страница 22: ...PAGE INTENTIONALLY LEFT BLANK...
