Smeg RTU304GX, Руководство пользователя

Страница: 17 / 22

Installation
19
EN
Incoming line pressure
Incoming line pressure upstream from the
regulator must be 1” (2.5 cm) W.C.P. higher
than the manifold pressure in order to check
the regulator. Incoming line pressure to the
regulator should be as follows for operation
and checking the regulator setting:
•
Natural Gas : Set pressure to 5” W.C.P.
Incoming line pressure of 6” - 10 1/2”
W.C.P maximum.
• LP Gas : Set pressure to 10” W.C.P.
Incoming line pressure 11”- 13” W.C.P.
maximum.
1.6 Conversion to Propane Gas
(LPG)
WARNING
This conversion kit shall be
installed by a qualified
service agency in
accordance with the
manufacturer’s instructions
and all applicable codes and
requirements having
jurisdiction. If the information
in these instructions is not
followed exactly, a fire,
explosion or production of
carbon monoxide may result
causing property damage,
personal injury or loss of life.
The qualified service agency
is responsible for the proper
installation of this kit. The
installation is not proper and
complete until the operation
of the converted appliance is
checked as specified in the
manufacturer’s instructions
supplied with the kit.
CAUTION : The gas supply shall
be shut off prior to disconnecting
the electrical power, before
proceeding with the conversion.