Smeg RTU304GX, Руководство пользователя

Страница: 10 / 22

Installation
12
Mounting the safety bracket
The safety bracket is a device designed to
prevent the appliance from being
accidentally extracted to the outside.
1. Measure the width of the slot for the
appliance (see “Cabinet clearances”
clearance
A ).
2. Divide the measurement in half and draw
the midline on the surface of the cabinet.
3. Measure 3” (76mm) from the front edge
of the cabinet and draw a line
perpendicular to the midline.
4. Position the safety bracket centered in the
intersection point of the two lines just
drawn and then fix it with the two
supplied screws.
5. Place the appliance on the cabinet
recess.
Notes:
• The appliance must sit securely in the cut-
out and must not be able to move
around (e.g. during cleaning).
• To help prevent cosmetic damage place
plastic shipping cover back over
appliance prior to loading into
cabinetry.
• If additional construction is nearby the
plastic shipping cover can be used to
preserve cosmetic finish.
Location of gas and electric outlets
X : Gas Supply Line
Y : Grounded Outlet
N
24”- 28” / 610 mm - 711 mm
S 2” - 4” / 51 mm - 101 mm
T 8” - 12” / 203 mm - 305 mm