BACnet IoT Gateway Start-up Guide
Page 56 of 60
Appendix C.7. Updating Firmware
To load a new version of the firmware, follow these instructions:
1. Extract and save the new file onto the local PC.
2. Open a web browser and type the IP Address of the FieldServer in the address bar.
NOTE:
Default IP Address is 192.168.1.24.
NOTE:
Use the FS Toolbox utility if the IP Address is unknown (
Appendix C.2
).
3.
Click on the “Diagnostics & Debugging” button.
4. In the Navigation Tree on the left-hand side, do the following:
a.
Click on “Setup”
b.
Click on “File Transfer”
c.
Click on the “Firmware” tab
5. In the Firmware
tab, click on “Choose Files” and select the firmware file extracted in step 1.
6.
Click on the orange “Submit” button.
7.
When the download is complete, click on the “System Restart” button.
