-10-
2. Desktop Duster Box/ ZVB Series
2.1 Specifications
I
o
n
iz
e
r
Ion generating type
Corona discharging type
Voltage supply type
High frequency AC type
Discharge output
*1
2500V
Amount of ozone generated
*2
0.03ppm
Offset Voltage
*3
/-10V
Discharge time
*3
0.3 seconds (1000V → 100V)
Du
s
t
c
o
ll
e
c
ti
o
n
Supply pressure range
0.1 to 0.7MPa
Exhaust flow rate
*4
410 to 1, 580 ℓ/min (ANR)
B
o
d
y
Fluid
Clean Dry Air
Operating pressure range
0.2 to 0.8MPa
Tube O.D.
Ø10
Power
24 VDC +/-10% 1A
Operating time setting
Continuous/timer [2, 5, 10sec]
Additional air flow setting
Continuous blow/pulse blow [50/100ms intervals]
Ambient/Fluid temperature
0 to 55
o
C
Ambient humidity
35 to 65 %RH (No condensation)
Air consumption
*5
800
ℓ/min (ANR)
Body weight
9.9kg
*6
*1: Value obtained by measurement using 1,000 MΩ and a probe of 5pF.
*2: Value above background level, measured with a distance of 300mm from the front of the ionizer nozzle.
*3: Static elimination characteristics is data obtained from the test using a charge plate (150mm x 150mm, static capacity 20pF) placed at a
distance of 100mm from the ionizer nozzle according to ANSI standard in US. This is provided as a guide with regulator 2 pressure at
0.2MPa
and without operating the dust collector. The values are provided just as a guide as they will vary depending on the material and
size of the workpiece.
*4: Value for one dust collector (supply pressure: 0.1 to 0.5 MPa)
*5: When additional air flow pressure is set to 0.2MPa and supply pressure to the dust collector to 0.4MPa.
*6: AC adapter and options (exhaust duct hose, dust collecting bag) are not included.
2.2 How to Order
1. Size
2. Additional air blow
3. Photoelectronic sensor
4. AC adapter
5. Option
*1: Connect a switch to the external input terminal on the back
side of the product.
*2: This is a regression reflection type photoelectric sensor.
Completely transparent workpieces detection is not available.
*3: The AC power supply cable attached to the product has the
configuration applicable to socket of 100 VAC.The cap needs
to be changed when the cable is connected to a socket of
voltage other than 100 VAC.
40
B
With an auxiliary blow
NIL
Without photoelectric sensor
*1
S
Photoelectric sensor
*2
NIL
Without AC Adaptor (DC-plug in attached)
A
AC Adaptor
*3
NIL
Without option
D
With 2 three meter length exhaust duct hoses with 2
hose bands attached
P
With 2 dust bags with 2 hose bands attached
S
With flow restrictors for additional air flow at two
positions
－
40
1
S
3
B
2
4
5
－
A
ZVB
DC plug
3 m exhaust duct hose
(Single product No.:
ZVB-D3A)
Dust collecting bag
(Single product No.:
ZVB-P1A)
AC adapter
(Single product No.:
ZVB-AC1)
