Auto preset
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
PRESSURE
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
SET
SET
SET
SET
SET
Channel selection
Adsorption Verification
Auto preset mode
+
To measuring mode
CH1
CH2
CH3
CH4
OUT2 auto preset preparation
(CH1 only)
OUT2 auto preset
(CH1 only)
( )
+
Work 1
Work 2
Work 1
Work 2
Work n
ON = A –
OFF = B +
A – B
4
A – B
4
Work n
High
Vacuum
Max. A
ON
OFF
Min. B
Atmosphere
Suction
Released
Max. A: Maximum pressure value
when workpiece is adsorbed.
Min. B: Minimum pressure value
when workpiece is not adsorbed.
Operation 2: Pressure Setting
Measur
ing mode
OUT1 auto preset preparation
Prepare the equipment to be set in
this mode.
In the case
where OUT1
setting is not
required.
( )
In the case
where OUT2
setting is not
required.
OUT1 auto preset
For adsorption verification:
In this mode, repeat the adsorption
and release of the workpiece for a
few times.
The optimum values will be set
automatically.
For supply pressure verification:
The optimum values will be set
automatically.
For adsorption verification:
Change the conditions of the
workpiece such as the (suction)
nozzle with vacuum pad attachment
and supply vacuum pressure.
For supply pressure verification:
Prepare the equipment for the
OUT2 setting in this mode.
For adsorption verification:
In this mode, repeat the adsorption
and release of the workpiece for a
few times.
The optimum values will be set
automatically.
For supply pressure verification:
The optimum values will be set
automatically.
16-3-14
Series
PSE530/200
SHOP ONLINE at www.airlinehyd.com
800-999-7378
