Operation 1: Initial Setting
4
Response time setting
PRESSURE
SET
SET
button.
CH
Auto preset mode
kPa
MPa
OUT2
1
2
3
4
OUT1
5
Manual setting/Auto preset
PRESSURE
SET
SET
CH
kPa
MPa
OUT2
1
2
3
4
OUT1
5 ms
20 ms
160 ms
640 ms
or
Anti-chattering function
Devices such as large bore cylinders and high-flow vacuum
ejectors consume a large volume of air when they operate, and
this may cause a momentary drop in the supply pressure. This
function prevents such momentary drops from being detected
as abnormal pressures by changing the response time setting.
<Principle>
The pressure values measured within the response time that is
selected by the user are averaged. By comparing this average
pressure value with the set pressure value, switch output
(ON//OFF) is determined.
Pressure
↑
Momentary change
t (ms)
t (ms)
Time
→
Time
→
Time
→
<Averaging>
<Averaging>
Set value
ON
OFF
ON
OFF
P1
P2
Press
Press
button.
CH1 setting is completed when the channel
display changes from blinking to lights on.
Repeat the same setting steps for CH2 to
CH4.
Switch output
operation
when normal
Switch output
operation when
anti-chattering
function is used.
Manual set mode
16-3-12
Series
PSE530/200
SHOP ONLINE at www.airlinehyd.com
800-999-7378
