Mounting
Wiring
Tighten screws 1/4 to 1/2 turn after the heads are flush with the panel.
Standard
When using
48 conversion adapter
48 conversion adapter
(ZS-26-D)
2-M3 x 8L
Front protective cover
(ZS-26-01)
Panel mount
(ZS-26-B)
Caution
The front face of the panel mount conforms to IP65
(IP40 when using the
48 conversion adapter);
however, there is a possibility of liquid filtration if the
panel mount adapter is not installed securely and
properly. Securely fix the adaptor with screws as
shown below.
1. Connecting sensor cable and connector (ZS-26-E)
• Cut the sensor cable as shown below.
• Insert each lead wire into the corresponding connector number
by following the chart provided below.
Core wire color
of sensor cable
Brown (DC+)
Black (Analog output)
Blue (DC–)
N.C.
Connector
no.
1
2
3
4
Power supply/Output connector
Sensor connector port
4
3
2
1
20 mm or more
4 3 2 1
4 3 2 1
4 3 2 1
B
A
2 m
C
Caution
• Make sure that the number of connector and the core wire
color match. After verifying that the wires are inserted all the
way, temporarily hold the connector down manually.
• Using pliers, snap A into B as shown below so that there is no
gap between A and B, and secure the connector.
• The A and B portion of the sensor connector are already tacked
down temporarily at the time of shipment. Do not snap the A
portion in place before inserting the cable. Note that the
connector cannot be taken apart to be reused once it is
crimped. Use a new sensor connector in case wiring or the
snapping of A into B are done incorrectly.
• To connect the connector to the multi-channel pressure sensor,
push the connector with its A portion facing toward you into the
socket until it clicks as shown below.
• To remove the connector, pull it straight out while applying
pressure to the fingers on both sides.
2. Connecting power supply/output connection cable
• To connect the power supply/output connection cable to the
controller, insert the cable connector with the C part facing
down until it clicks.
Brown
Black
Blue
N.C.
1
2
3
4
Verify from the top side of
A that the lead wires are
inserted completely.
Series
PSE
Specific Product Precautions 2
Be sure to read before handling.
16-3-20
SHOP ONLINE at www.airlinehyd.com
800-999-7378
